Alula RE934ZT Z Wave Translator Expansion Card

The Alula RE934ZT Translator & Z-Wave Connect+ Expansion Card is an expansion module for the Connect+ panel that adds Z-Wave control and a wireless sensor translator to support third‑party devices. It enables the panel to create or join a Z-Wave network and provides two-way communication with Z-Wave devices, expanding the system’s home automation capabilities. The card allows Connect+ to receive Interlogix (formerly GE), Honeywell, 2GIG, Napco, or DSC wireless sensors, helping to lower takeover costs and installation time by leveraging existing wireless hardware. Dual antennas are included to enhance sensor range and reliability. Installation requires inserting the RE934ZT into expansion slot 3 of the Connect+ unit, aligning the 8‑pin connector, seating the card firmly, routing the antenna beneath the housing retention tab, and then reconnecting power. You’ll configure the RF Translator Protocol Options—None, GE, DSC, HW (Honeywell), 2GIG, or NAPCO—through the AlulaConnect Dealer Portal or Installer App to match your network and devices. A firmware baseline note for Connect+ is to ensure version 1.1.20.0 or greater before proceeding. In use, the RE934ZT serves as a translator between legacy wireless sensors and a Z-Wave network, enabling broader automation scenarios while maintaining compatibility with a range of popular sensor brands.