AMX FG1010-48-01 CatPro RX To Stereo VGA Decoder Receiver

AMX FG1010-48-01 CatPro RX to Stereo VGA Decoder Receiver is the RGBHV+Stereo CatPro receiver module that completes an AMX AutoPatch CatPro installation by decoding the CatPro signal back to analog VGA for a local display, while preserving stereo audio. Designed to pair with CatPro RGBHV+Stereo Transmitter modules, this black RX module supports unbalanced RGBHV video and stereo audio, with maximum resolutions of 1600x1200 (4:3) and 1920x1080p (16:9) at 60 Hz and a documented range of up to 1000 ft (305 m) between TX and RX when used with proper cabling. It uses a 12–24 V DC supply (up to 6 W) via a 2.1 mm power jack and interfaces with the CatPro link over RJ-45, while providing VGA output through the HD-15 pathway to the display. The RX module includes tangible video and audio alignment controls: Gain and Peak potentiometers to compensate for overall cable length and an Adjust knob to tune skew and destination volume, helping to maintain image quality and accurate audio levels over long runs. Its compact enclosure measures about 5.82 in wide (14.78 cm) by 5.22 in deep (13.26 cm) with a height of 1.42 in (3.61 cm) and weighs roughly 1.5 lb (0.68 kg). Typical applications span classrooms, conference rooms, and control rooms where high‑definition RGBHV signals must travel over CatPro links to a VGA display with synchronized stereo audio.