Banner Engineering SSA-EBM-02ED1Q6B Panel Mount Emergency Stop Device

The Banner Engineering SSA-EBM-02ED1Q6B is a 22 mm panel-mount emergency stop push button from Banner’s SSA-EBM series, designed for panel mounting through a 22 mm cutout with an IP65-rated polycarbonate housing and a 40 mm actuator on a metal shaft. It uses push-to-stop, twist-to-release operation and includes two normally closed (NC) safety contacts rated at 2 A @ 24 V DC, suitable for basic stop circuits in industrial control. The kit components for this model typically include the 40 mm actuator on a metal shaft, a metal mounting adapter, and a 70 mm × 70 mm × 56 mm plastic enclosure with an “Emergency Stop” legend, aligning with Banner’s standard SSA-EBM kit packaging. Overall dimensions for the assembly are about 105 mm high by 70 mm wide by 70 mm deep, and the operating temperature range spans -25 °C to 60 °C, making it suitable for typical factory environments. It is important to note that SSA-EBM series devices are not safeguarding devices and require an overt action to stop machine motion, so they should not replace required safeguarding. For applications needing in-series diagnostics, models in the SSA-EBM-xxED1Qxx family (including 02ED1Q6B) support ISD connectivity when used with Banner’s SSA-ISD-TCA accessory.