Brodersen pxt-10.924 Temperature Controller

Brodersen PXT-10.924/RS Temperature Converter, part of the 9200 Series, is a DIN-rail mounted signal conditioner that converts RTD temperature signals into a clean analogue output for process control. It accepts Pt100 or Pt1000 RTD sensors in 2- or 3-wire configurations with compensating leads, covering a temperature range from -50 to 300 °C. The device provides selectable outputs: 0-10 V DC, 0-20 mA, or 4-20 mA, with an internal 500 Ω shunt enabling 0-10 V operation, and both offset and gain adjustable by up to ±5% of the full-scale signal. Power can be supplied from multiple mains options, including 24 V DC (20.4–27.6 V) or 24 V AC, as well as 115 V AC or 230 V AC variants, with the unit designed for 35 mm DIN-rail mounting and IP20 protection. The PXT-10.924/RS is CE-marked and provides galvanic isolation between the supply and the output up to 3.75 kV AC for 1 minute, while noting that the sensor input is not galvanically isolated from the analogue output. Front‑panel indicators include a green LED for operating voltage and a yellow LED that signals input level below 5% of full scale. Weighing roughly 170 g, the module is intended to feed PLCs, PID controllers, or data assemblers with a reliable RTD-derived temperature signal, enabling precise process feedback and monitoring in heating, cooling, and temperature‑critical applications.