SMC MGQM50-25 Pneumatic Guided Slide Cylinder

SMC MGQM50-25 MGQ Compact Guided Cylinder is a double-acting pneumatic cylinder with a 50 mm bore and 25 mm stroke, designed as a compact guided actuator within SMC’s MGQ family. It employs an internal guide shaft and a slide-bearing construction to isolate rod movement from load and seals, providing enhanced lateral stability and better resistance to side loads, while rubber bumpers furnish end-of-stroke cushioning. The unit is direct-mountable with a single 20 mm rod and a 1/4 BSPT port, operating from 0.1 to 1 MPa (roughly 14.5 to 145 psi) with a proof pressure up to 1.5 MPa. At 100 psi, it delivers about 1374 N of push force and 1154 N of pull force. Overall dimensions are approximately 106 mm in length, 140 mm in width, and 59 mm in height, reflecting its compact footprint for tight automation cells. The MGQM50-25 uses a double-acting piston suitable for applications such as pick-and-place, positioning, clamping, and precise linear alignment in confined spaces where guided motion and reduced side-load sensitivity are required.